| Coolant | 7.2 US qt · 6.8 L |
|---|---|
| Wheel-nut torque | 96 lb-ft · 130 N·m |
| Oil viscosity | SAE 0W-20 |
Per-engine engine-oil and coolant capacities for the Mercedes-Benz A-Class (W177, 4th gen) (2018 – present), read from the manufacturer's owner's manual and cited per value. Oil figures are the service-refill quantity with a new filter; where the generation offers more than one engine the figures differ — match the row to your engine. Fill quantities differ by procedure: a drain-and-fill is usually less than a dry (overhaul) fill — confirm the method in the manual before topping up.
Per-engine fluids 1 engine
Other fluids & capacities 3
| Fluid | Capacity | Spec / viscosity |
|---|---|---|
| A/C refrigerant[1] | — | R1234yf |
| Brake fluid[1] | — | DOT 4 LV |
| Transmission fluid[1] | 4.8 US qt · 4.5 L · 7G-DCT 700.423 · ATF MB 239.22 | — |
From the manufacturer's workshop / owner documentation for this generation. Gen-wide figures — some values can vary by trim or model year. Fill quantities differ by procedure: a transmission or axle “service” drain-and-fill is often far less than the dry capacity — always confirm the exact fill method in the manual before filling.
Drain & wheel torque 2
Related verified specs
| Cylinders | 4 | |
|---|---|---|
| Engine capacity | 1,332 cm3 | |
| Engine code | 282.914 | |
| Fuel | petrol | |
| Maximum power | 100 kW |
Full specifications, dimensions and all engines → Mercedes-Benz A-Class (W177, 4th gen) overview
Frequently asked
- What is the engine oil capacity of the Mercedes-Benz A-Class (W177, 4th gen) (2018 – present)?
- Engine oil capacity with a new filter is 5.4 US qt · 5.1 L. This is the service-refill quantity, not the dry/overhaul fill; add most of it, then top up to the dipstick mark and use the viscosity grade listed above. Verified from the manufacturer's documentation and cited.
- What is the coolant capacity of the Mercedes-Benz A-Class (W177, 4th gen)?
- The total cooling-system capacity (including the heater core and expansion tank) is 7.2 US qt · 6.8 L. A routine drain-and-fill replaces less than the full system, so bleed the air and re-check the level warm. Use the coolant type specified for this vehicle — mixing incompatible coolants reduces corrosion protection. Verified from the manufacturer's documentation.
- What is the wheel-nut (lug) torque for the Mercedes-Benz A-Class (W177, 4th gen)?
- Wheel-nut (lug) torque is 130 Nm. Tighten in a diagonal (star) pattern in two or three even stages, on clean, dry threads, and re-check after roughly 80 km (50 miles) of driving — the most common cause of warped brake discs is uneven or over-torqued wheel nuts. Verified from the manufacturer's documentation.
Sources
- OEM workshop data — Mercedes-Benz A 180 (M282)Vendor-compiled workshop data (from manufacturer service data)Fluid capacities + torques from OEM workshop service data for the A 180 (M282 1.3 / 282.914). Oil 5.1 L MB 229.72; coolant 6.8 L MB 325.6/326.6; brake MB 331.0 / DOT 4 LV 0.5 L; 7G-DCT 700.423 ATF MB 239.22 4.5 L (6MT 711.636 75W-85 MB 239.31 alt.); refrigerant R1234yf; oil-drain 50 N·m; road-wheel bolt 130 N·m (criss-cross 75→130).Retrieved 2026-11-08
- Mercedes-Benz A-Class Owner's Manual (2022)OEM owner's-manual portalHeld owner's manual PDF (A-Class W177, 2022, GB English). Technical data (p405-407): fuel tank 51 L petrol / 43 L diesel (reserve 5 L); engine oil spec A 180/A 200 petrol MB 229.71/229.72/229.81, diesel 229.52/229.61/229.71/229.72. Confirms the the workshop oil spec (229.72); petrol fuel tank corrected to 51 L.Retrieved 2026-11-08