| Coolant | 6.9 US qt · 6.5 L |
|---|---|
| Oil viscosity | SAE 0W-20 |
Per-engine engine-oil and coolant capacities for the Mitsubishi Outlander III (2012 – 2021), read from the manufacturer's owner's manual and cited per value. Oil figures are the service-refill quantity with a new filter; where the generation offers more than one engine the figures differ — match the row to your engine. Fill quantities differ by procedure: a drain-and-fill is usually less than a dry (overhaul) fill — confirm the method in the manual before topping up.
Per-engine fluids 1 engine
Other fluids & capacities 3
| Fluid | Capacity | Spec / viscosity |
|---|---|---|
| A/C refrigerant[2] | — | R134a |
| Brake fluid[1] | — | DOT 4 |
| Transmission fluid[2] | 2.3 US qt · 2.2 L · front motor / reduction · CVTF-J4 | — |
From the manufacturer's workshop / owner documentation for this generation. Gen-wide figures — some values can vary by trim or model year. Fill quantities differ by procedure: a transmission or axle “service” drain-and-fill is often far less than the dry capacity — always confirm the exact fill method in the manual before filling.
Drain & wheel torque 1
| Oil drain plug torque[1] | 34–44 |
|---|
Related verified specs
| Cylinders | 4 | |
|---|---|---|
| Engine capacity | 1,998 cm3 | |
| Engine code | 4B11 | |
| Fuel | petrol / electric (plug-in hybrid) | |
| Maximum power | 89 kW |
Full specifications, dimensions and all engines → Mitsubishi Outlander III overview
Frequently asked
- What is the engine oil capacity of the Mitsubishi Outlander III (2012 – 2021)?
- Engine oil capacity with a new filter is 4.9 US qt · 4.6 L. This is the service-refill quantity, not the dry/overhaul fill; add most of it, then top up to the dipstick mark and use the viscosity grade listed above. Verified from the manufacturer's documentation and cited.
- What is the coolant capacity of the Mitsubishi Outlander III?
- The total cooling-system capacity (including the heater core and expansion tank) is 6.9 US qt · 6.5 L. A routine drain-and-fill replaces less than the full system, so bleed the air and re-check the level warm. Use the coolant type specified for this vehicle — mixing incompatible coolants reduces corrosion protection. Verified from the manufacturer's documentation.
Sources
- OEM workshop data — Mitsubishi Outlander PHEV (GG2W)Vendor-compiled workshop data (from manufacturer service data)Fluid capacities + specs + oil-drain torque from OEM workshop service data for the Outlander PHEV (2.0 4B11 + twin motors). Engine coolant 7.5 L without electric heater / 9.0 L with heater; separate motor/inverter cooling loop 6.5 L. Reduction gearbox Dia Queen CVTF-J4; transfer box 0.47 L SAE 80 GL-5; front/rear diff ATF SP-III.Retrieved 2026-11-08
- Mitsubishi Outlander PHEV Owner's Manual (2014)OEM owner's-manual portalHeld owner's manual PDF (Outlander PHEV GG2W, 2014). Refill capacities (p12-10/11): engine oil 4.6 L (4.3 pan + 0.3 filter), engine coolant 6.5 L without electric heater / 7.5 L with heater [incl. 0.65 L reserve], rear-motor (EV) coolant 6.5 L, front motor/reduction fluid 2.2 L CVTF-J4, transaxle ATF SP III front 3.46 L / rear 0.85 L, brake DOT 3/4, washer 4.5 L, refrigerant HFC-134a 570-610 g. Cross-confirms the workshop data; corrected engine coolant to 6.5 L (without heater).Retrieved 2026-11-08