| Coolant | 9.5 US qt · 9 L |
|---|---|
| Oil viscosity | SAE 10W-30 |
Per-engine engine-oil and coolant capacities for the Mitsubishi Pajero III (V60) (2000 – 2006), read from the manufacturer's owner's manual and cited per value. Oil figures are the service-refill quantity with a new filter; where the generation offers more than one engine the figures differ — match the row to your engine. Fill quantities differ by procedure: a drain-and-fill is usually less than a dry (overhaul) fill — confirm the method in the manual before topping up.
Per-engine fluids 1 engine
Other fluids & capacities 6
| Fluid | Capacity | Spec / viscosity |
|---|---|---|
| A/C refrigerant[1] | — | R-134a |
| Brake fluid[2] | — | DOT 3 or DOT 4 |
| Front differential oil[1] | 1.2 US qt · 1.15 L · SAE 80W API GL-5 | — |
| Rear differential oil[1] | 1.7 US qt · 1.6 L · SAE 80W API GL-5 | — |
| Transfer case oil[1] | 3.0 US qt · 2.8 L · SAE 80 API GL-5 | — |
| Transmission fluid[2] | 3.4 US qt · 3.2 L · 5MT V5M31 75W-90 GL-4; AT 10.9 L | — |
From the manufacturer's workshop / owner documentation for this generation. Gen-wide figures — some values can vary by trim or model year. Fill quantities differ by procedure: a transmission or axle “service” drain-and-fill is often far less than the dry capacity — always confirm the exact fill method in the manual before filling.
Drain & wheel torque 1
| Oil drain plug torque[1] | 29 lb-ft · 39 N·m |
|---|
Related verified specs
| Cylinders | 4 | |
|---|---|---|
| Engine capacity | 3,200 cm3 | |
| Engine code | 4M41 | |
| Fuel | diesel | |
| Maximum power | 118 kW |
Full specifications, dimensions and all engines → Mitsubishi Pajero III (V60) overview
Frequently asked
- What is the engine oil capacity of the Mitsubishi Pajero III (V60) (2000 – 2006)?
- Engine oil capacity with a new filter is 9.0 US qt · 8.5 L. This is the service-refill quantity, not the dry/overhaul fill; add most of it, then top up to the dipstick mark and use the viscosity grade listed above. Verified from the manufacturer's documentation and cited.
- What is the coolant capacity of the Mitsubishi Pajero III (V60)?
- The total cooling-system capacity (including the heater core and expansion tank) is 9.5 US qt · 9 L. A routine drain-and-fill replaces less than the full system, so bleed the air and re-check the level warm. Use the coolant type specified for this vehicle — mixing incompatible coolants reduces corrosion protection. Verified from the manufacturer's documentation.
Sources
- OEM workshop data — Mitsubishi Pajero (V60)Vendor-compiled workshop data (from manufacturer service data)Fluid capacities + specs + oil-drain torque from OEM workshop service data for the Pajero 3.2 DI-D (4M41). Also: transfer box 2.8 L, front diff 1.15 L, rear diff 1.6 L (no doc-first fact_type yet).Retrieved 2026-11-08
- Mitsubishi Pajero Owner's Manual (2007)OEM owner's-manual portalHeld owner's manual PDF (Pajero V80, 2007). The V60/V80 Pajero share the 4M41 engine + Super Select 4WD drivetrain, so its capacities (p355) cross-confirm the V60 drivetrain fluids: coolant 9.0 L, manual-trans 3.2 L GL-4 75W-85, brake DOT 3/4, transfer 2.8 L, diffs 1.15/1.6 L, AT 10.9 L. Engine oil differs by generation (V80 7.5 L vs V60 8.5 L) — V60 value kept from the workshop doc.Retrieved 2026-11-08