Recommended cold pressure · front
2.5 bar · 36 psi
175/65R15 · other fitments below
Recommended cold tyre inflation pressures for the Suzuki Ignis (MF, 1st gen) (2016 – present), by fitment and axle — read directly from the vehicle's door-pillar placard and cited. Set pressures cold. Where the placard gives a separate high-speed or full-load figure, use it for those conditions.
175/65R15 standard
175/60R16
Frequently asked
- What tyre pressure does the Suzuki Ignis (MF, 1st gen) (2016 – present) take?
- The recommended cold front tyre pressure is 2.5 bar · 36 psi on 175/65R15 (see the per-fitment table for other sizes and the rear axle) — read from the vehicle's door-pillar placard.
- Should I check pressures hot or cold?
- Always set tyre pressures cold (before driving, or at least 3 hours after). Pressure rises as tyres warm up, so a “cold” placard value checked hot will read high. Increase the placard pressure for sustained high-speed or fully-laden driving where a separate figure is given.
Sources
- Tyre inflation placard — Suzuki Ignis (MF)Cold tyre inflation placard (code 62R1); first-party; VIN JSAMFH11S00144154.Retrieved 2026-11-04