ownerspecs

Tyre sizes & pressures

Suzuki S-Cross (JY, 1st gen)2013 – 20212 fitments
1 source citedLast reviewed 2026-11-06
Recommended cold pressure · front
2.3 bar · 33 psi
215/55R17 · other fitments below

Recommended cold tyre inflation pressures for the Suzuki S-Cross (JY, 1st gen) (2013 – 2021), by fitment and axle — read directly from the vehicle's door-pillar placard and cited. Set pressures cold. Where the placard gives a separate high-speed or full-load figure, use it for those conditions.

215/55R17 standard

ConditionFrontRearSource
Normal / comfort2.3 bar · 33 psi2.3 bar · 33 psiVerified[1]
Full load2.4 bar · 35 psi2.8 bar · 41 psiVerified[1]
Eco / economy2.8 bar · 41 psi2.6 bar · 38 psiVerified[1]

215/60R16

ConditionFrontRearSource
Normal / comfort2.3 bar · 33 psi2.3 bar · 33 psiVerified[1]
Full load2.4 bar · 35 psi2.8 bar · 41 psiVerified[1]
Eco / economy2.8 bar · 41 psi2.6 bar · 38 psiVerified[1]

Spare

T135/90D16compact spare4.2 bar · 61 psiVerified[1]

Frequently asked

What tyre pressure does the Suzuki S-Cross (JY, 1st gen) (2013 – 2021) take?
The recommended cold front tyre pressure is 2.3 bar · 33 psi on 215/55R17 (see the per-fitment table for other sizes and the rear axle) — read from the vehicle's door-pillar placard.
Should I check pressures hot or cold?
Always set tyre pressures cold (before driving, or at least 3 hours after). Pressure rises as tyres warm up, so a “cold” placard value checked hot will read high. Increase the placard pressure for sustained high-speed or fully-laden driving where a separate figure is given.

Sources

  1. Tyre inflation placard — Suzuki S-Cross (JY)Cold-inflation placard (code 54P00(GE)); first-party photo of NL plate P-739-KF, VIN TSMJYA02S00518150; transcribed record held; underlying photo pending intake to car_sources. Primary fitment 215/55R17. [intaken to car_sources 2026-11-06]Retrieved 2026-11-06