Lexus IS II (XE20)OEM press
| Manufacturer | Lexus |
|---|---|
| Model | IS |
| Production | 2005 – 2013 |
| Body | Sedan |
| Layout | RWD |
| Engines | 4GR-FSE |
| Markets | Global · multi-market |
Verified specifications17 datapoints
Each value below cites its source document; sources are labelled by type (OEM document, official register, OEM portal, or vendor-compiled workshop data) in the Sources list. Where multiple homologated variants exist, a value shown as a range varies by variant.
| Engine oil (with filter)[3] | 6.3 L |
|---|---|
| Coolant[3] | 9.1 L |
Full oil & fluid capacities, per engine → — engine-oil (with filter), viscosity, coolant, transmission & torque, cited.
| Engine | |
|---|---|
| Cylinders[1] | 6 |
| Engine capacity[1] | 2,500 cm3 |
| Engine code[1] | 4GR-FSE |
| Fuel[1] | petrol |
| Maximum power[1] | 153 kW |
| Dimensions | |
| Track[1] | 1,540–1,550 mm |
| Height[1] | 1,425 mm |
| Length[1] | 4,575 mm |
| Wheelbase[1] | 2,730 mm |
| Width[1] | 1,800 mm |
| Performance | |
| Top speed[1] | 230 km/h |
| Emissions & economy | |
| CO₂ emissions[1] | 231 g/km |
| Emission regulation[1] | 70/220*2003/76B |
| Emission standard[1] | Euro 4 |
| Fuel consumption[1] | 9.8 l/100km |
| Sound level (drive-by)[1] | 72 dB(A) |
| Sound level (stationary)[1] | 83 dB(A) |
| EU type-approval figures. CO₂ (g/km) and the Euro class set road-tax bands and low-emission-zone access across the EU. | |
Dimensions, weights & capacities
| Length | 4575 mm · 180.1 in |
|---|---|
| Width | 1800 mm · 70.9 in |
| Height | 1425 mm · 56.1 in |
| Wheelbase | 2730 mm · 107.5 in |
| Kerb weight | 1545 kg · 3406 lb |
| Gross weight (GVWR) | 2055 kg · 4530 lb |
| Front track | 1540 mm · 60.6 in |
| Rear track | 1550 mm · 61.0 in |
| Fuel tank | 65 L · 17.2 gal (US) · 14.3 gal (UK) |
Pick your trim — compare all variants1 trim
Side-by-side specs for every IS II (XE20) variant. Click a row for the full spec sheet (fluids, torques, parts, maintenance) filtered to that engine.
| Trim | Engine | Hp | Drive | Top | Fuel | CO₂ | Kerb wt |
|---|---|---|---|---|---|---|---|
| IS 250 | 4GR-FSE | 208 | RWD | 230 km/h | 9.8 L/100 | 231 g/km | 1545 kg |
Engine specifications1
| Engine | Displacement | Power |
|---|---|---|
| 4GR-FSE2.5 L V6 (4GR-FSE) · 6-cyl · petrol · naturally aspira | 2.5 L · 2,500 cc | 208 hp |
Displacement, bore, stroke and compression are factory engine geometry; power and torque are the peak figures across this generation's variants. Match the engine code to your vehicle.
Owner-manual data
Sources
- RDW Open Data (CC0) — EU type-approval e11*2001/116*0206*00Official registerDutch vehicle register (RDW) open data — registration + fuel + EU type-approval (TGK) datasets; CC0. Type-level identity, dimensions, masses, emissions, engine.Retrieved 2026-11-08
- OEM workshop data — Lexus IS (XE20)Vendor-compiled workshop data (from manufacturer service data)Fluid capacities + specs + oil-drain torque from OEM workshop service data for the IS 250 (4GR-FSE), Europe spec.Retrieved 2026-11-08
- Lexus IS 250 Owner's Manual (2008)OEM owner's-manual portalHeld owner's manual PDF. Engine-level fluid capacities (oil 6.3 L with filter p410, coolant 9.1 L p411, manual-trans gear oil 1.8 L p413, brake DOT 3 p413) are market-independent and cross-confirm the workshop data for the EU IS 250 (same 4GR-FSE). Oil viscosity differs by market (US 2008 = 5W-30; EU = 0W-20) — EU grade kept.Retrieved 2026-11-08